Module suitable for Omega/DIN rail mounting, allows to connect one or two Laumas instruments in slave configuration to a PROFIBUS DP master by means of the RS422-485 output.

• RS422/485 port: Baud rate max 115200 bit/s. Max distance 1200 m (baud 9600).
• PROFIBUS DP port: Baud rate max 12 Mbit/s. Max distance 1200 m (baud 9600).
• Power supply 12 – 24 VDC.
• Dimensions : 71 x 90 x h 58 mm.

Module suitable for Omega/DIN rail mounting. Automatic selection of receiving/transmission.

• Baud rate max 115200 bit/s.
• RS232 port: max distance 15m
• RS485 port: max distance 1200m (baud 9600 bit/s).
• Power supply 5 – 26 VDC.
• Dimensions: 27 x 93 x h 51 mm.

WiFi communication interface device between two serial devices.

• Wifi module for wireless connection via Modbus RTU, Laumas ASCII protocol
• RS232 and RS485 ports (Modbus RTU/Laumas ASCII protocol)
• Connectable to others MODWF devices devices and W series Laumas instruments with OPZW1RADIO optional
• Wall mounting

• Converter compliant with USB specification 1.1.
• D-SUB9 connector.
• Supports over 1 Mbps data transfer rate.

• Converter compliant with USB 2.0 full speed standard.
• At the ends of the cable there are a type A USB connector and individual stripped and tinned wires for easy connection to a terminal board.
• Cable is 1.8 m long.
• Data transfer rate: from 300 bps to 300 Mbps.

A pair of radio modems RS232/RS485 for data or load cell signal transmission via radio frequency.

• Frequency 868 MHz with 7 channels RF.
• Signal range max 200 meters in free air space.
• Connecton modes: RS232 / RS485 (max. baudrate 38400 bit/s).
• Power Supply 5 VDC. 230VAC/5VDC external power supply included..
• Dimensions 126 x 79 x h 42 mm.

• For connecion up to 32 devices equipped with RS485 interface to a RS232 port.
• Equipped with a DB9 female connector for RS232 and a 2-pin removable terminal block for RS485.
• Data transfer rate: 115200 bps.